The two locations in FTP are referred to as Client and a Server. If you received other codes than the one presented in the table above, you must export the log files and share with Photomate support center. FTP is a network protocol for transferring files from one location to another on the Internet. Settings -> Wired Network and set at Secondary DNS server address the IP of your server.If the status of Start report test is Failure (0x1002) or (0x1003), you need to check whether IP address of DNS server was set, or the FTP server is correctly configured. > FTP ->set the basic parameters for your server (FTP server, username, password, and the remote directory from your server)àEnable Data Export> Start report test> Submit Login on Smartlogger -> Settings -> Comm. Set the FTP parameters on Smartlogger WebUI Users are advised to take measures at the PV plant level to reduce security risks, or use Huawei management system to mitigate the risks. Users are liable for any loss caused by the enabling of the FTP protocol (non-secure protocol). Therefore, exercise caution when using this protocol. This protocol can transmit the running data of PV plants, which may cause user data breach. To reduce network security risks, the IP address of the connected third-party FTP server is left blank by default. Data transmitted by FTP is not encrypted. A third-party NMS can access Huawei devices after being configured.įTP is a universal standard protocol without any security authentication mechanism.

The SmartLogger can report the configuration information and running data of the managed PV plant system through FTP. The FTP function is used to access a third-party NMS.

Ftp smart